Air Duct

Developed from experience in MotoGP competition and transferred to road bikes by Puig in collaboration with the Honda HRC team, the Air Duct for the Honda CB750 Hornet 2025 has been designed to optimize braking system performance under demanding riding conditions. Brakes are a key element for motorcycle safety and control, and their effectiveness can be compromised when operating at higher-than-ideal temperatures due to intense braking, continuous use, or high ambient temperatures.

Thanks to its specific design, the Air Duct channels airflow directly toward the brake calipers, achieving an average temperature reduction of up to 10 degrees. This thermal improvement allows the brakes to operate within a more optimal range, increasing effectiveness, maintaining a more consistent braking feel, and preventing performance loss in high-demand situations. exigencia.

The set consists of two cooling ducts for the brake calipers, designed and manufactured from high-quality ABS material at Puig’s plant in Barcelona, next to the Circuit de Barcelona-Catalunya, using the most advanced plastic molding technologies.

It includes steel brackets that ensure strength and rigidity, finished in textured black and treated with a prior cataphoresis coating to prevent oxidation over time.

Installation is quick and easy and can be completed in just a few minutes by following the step-by-step instructions included in paper format or available online.

It is important to apply the specified tightening torque to ensure proper fastening, as this is a particularly sensitive area.

The cooling system acts as a channel that captures frontal air, compresses and accelerates it, directing it straight toward the brake calipers. This controlled airflow prevents overheating and allows the brakes to operate more efficiently.

Developed directly from MotoGP experience and transferred to road bikes by Puig in collaboration with the Honda HRC team, the Air Duct for the Honda CBR600RR has been designed to optimize braking system performance under demanding riding conditions. Brakes are a key element for motorcycle safety and control, and their effectiveness can be compromised when operating at higher-than-ideal temperatures due to intense braking, continuous use, or high ambient temperatures.

Thanks to its specific design, the Air Duct channels airflow directly toward the brake calipers, achieving an average temperature reduction of up to 10 degrees. This thermal improvement allows the brakes to operate within an optimal range, increasing effectiveness, maintaining a more consistent braking feel, and preventing performance loss in high-demand situations.

The set consists of two cooling ducts for the brake calipers, designed and manufactured from high-quality ABS material at Puig’s plant in Barcelona, next to the Circuit de Barcelona-Catalunya, using the most advanced plastic molding technologies.

Installation is quick and easy and can be completed in just a few minutes by following the step-by-step instructions included in paper format or available online.

It is essential to apply the specified tightening torque to ensure proper fastening, as this is a particularly sensitive area.

The cooling system acts as a channel that captures frontal air, compresses and accelerates it, directing it straight toward the brake calipers. This controlled airflow prevents overheating and allows the brakes to operate more efficiently.

Developed from racing experience and redesigned by Puig for road motorcycle use, the Air Ducts for the Honda CB1000 Hornet 2025 are engineered to improve braking system performance and safety under demanding riding conditions. Brakes are a key element in motorcycle control and riding feel, and their performance can be affected by high temperatures caused by intense braking, continuous use, or high ambient temperatures.

Thanks to their specific design, the Air Ducts channel airflow toward the brake calipers, achieving an average temperature reduction of up to 10 degrees. This thermal improvement allows the brakes to operate within a more optimal range, increasing effectiveness, maintaining a more consistent braking feel, and preventing performance loss in high-demand situations.

The set consists of two cooling ducts for the brake calipers, designed and manufactured at Puig’s plant in Barcelona using the most advanced plastic molding technologies.

It includes steel brackets that ensure strength and rigidity, finished in textured black, discreet and perfectly integrated into the motorcycle’s aesthetics.

Installation is quick and easy and can be completed in just a few minutes by following the step-by-step instructions included in paper format or available online.

It is important to apply the specified tightening torque to prevent loosening, as this is a particularly sensitive area.

The cooling system acts as a channel that captures frontal air, compresses and accelerates it, directing it straight toward the brake calipers. This controlled airflow prevents overheating and allows the brakes to operate more efficiently.

The Puig Air Duct for the Ducati Streetfighter V2 25’ is a component developed from MotoGP racing experience. This product has been transferred from competition to road motorcycles thanks to the collaboration between Puig and the Honda HRC team, applying technical solutions used in the racing environment to improve performance during sporty riding.

Brakes are a key element for motorcycle safety and control. Under demanding riding conditions —such as repeated hard braking or high ambient temperatures— brakes often operate above their optimal temperature range. This temperature increase can lead to reduced braking performance and a loss of braking feel.

Thanks to the Air Duct system, brake operating temperature can be reduced by an average of 10 °C, improving braking efficiency, performance and feel. This results in a more consistent response and better control during riding.

The kit consists of two cooling ducts specifically designed to direct airflow towards the brake calipers.

They are designed and manufactured at Puig facilities in Barcelona using the most advanced plastic moulding technologies, ensuring a lightweight and durable component that integrates perfectly with the motorcycle’s aesthetics.

The brackets are made of steel to guarantee high structural resistance. They feature a textured black finish and a prior cataphoresis treatment that protects the material against corrosion and ensures long-term durability.

Installation is simple and can be completed in just a few minutes by following the step-by-step instructions included with the product or available online.

During installation it is important to apply the recommended tightening torque to the bolts to ensure proper fastening, as this is a sensitive area of the motorcycle.

Please review the recommendations and warnings included in the mounting instructions.

The brake cooling system works as an aerodynamic duct that captures the frontal airflow, compresses and accelerates it, directing it straight toward the brake calipers.

This additional airflow helps prevent brake overheating and allows the calipers to operate within their optimal temperature range.

Track tests have shown an average temperature reduction of approximately 10 °C, helping maintain more consistent and effective braking performance even under demanding riding conditions.

The Puig Air Duct for the Ducati Panigale V4 25’ is a component developed from MotoGP racing experience. This product has been transferred from competition to road motorcycles thanks to the collaboration between Puig and the Honda HRC team, applying technical solutions used in the racing environment to improve performance during sporty riding.

Brakes are a key element for motorcycle safety and control. Under demanding riding conditions —such as repeated hard braking or high ambient temperatures— brakes often operate above their optimal temperature range. This temperature increase can lead to reduced braking performance and a loss of braking feel.

Thanks to the Air Duct system, brake operating temperature can be reduced by an average of 10 °C, improving braking efficiency, performance and feel. This results in a more consistent response and better control during riding.

The kit consists of two cooling ducts specifically designed to direct airflow toward the brake calipers.

They are designed and manufactured at Puig facilities in Barcelona using the most advanced plastic molding technologies, ensuring a lightweight and durable component that integrates perfectly with the motorcycle’s aesthetics.

The brackets are made of steel to guarantee high structural resistance. They feature a textured black finish and a prior cataphoresis treatment that protects the material against corrosion and ensures long-term durability.

Installation is simple and can be completed in just a few minutes by following the step-by-step instructions included with the product or available online.

During installation it is important to apply the recommended tightening torque to the bolts to ensure proper fastening, as this is a sensitive area of the motorcycle.

Please review the recommendations and warnings included in the mounting instructions.

The brake cooling system works as an aerodynamic duct that captures the frontal airflow, compresses and accelerates it, directing it straight toward the brake calipers.

This additional airflow helps prevent brake overheating and allows the calipers to operate within their optimal temperature range.

Track tests have shown an average temperature reduction of approximately 10 °C, helping maintain more consistent and effective braking performance even under demanding riding conditions.

Brakes are a key element for motorcycle safety and control, as well as for ensuring proper braking feel during riding. In many cases, especially under demanding riding conditions —such as repeated hard braking or high ambient temperatures— the braking system operates above its ideal working range, which can lead to reduced performance and braking feel.

With the Air Duct system, brake operating temperature can be reduced by an average of 10 °C, improving the overall performance of the braking system and enhancing both braking efficiency and feel.

The kit consists of two cooling ducts specifically designed to direct airflow toward the brake calipers.

They are designed and manufactured at Puig facilities in Barcelona using the most advanced plastic molding technologies, ensuring a lightweight and durable component.

The brackets are made of steel to guarantee structural resistance and feature a textured black finish that integrates discreetly with the motorcycle’s aesthetics.

Installation is simple and can be completed in just a few minutes by following the step-by-step instructions included in paper format or available online.

During installation it is important to apply the specified tightening torque to the bolts to ensure proper fastening, as this is a sensitive area of the motorcycle.

Please review the recommendations and warnings included in the mounting instructions.

The brake cooling system works as an aerodynamic duct that captures the frontal airflow, compresses and accelerates it to direct it straight toward the brake calipers.

This prevents overheating of the braking system and allows the calipers to operate within their optimal temperature range.

Track tests have shown an average temperature reduction of approximately 10 °C.

Includes mounting instructions.

The Puig Air Duct for the Kawasaki Z1100 26’ is a product developed from MotoGP racing experience. Puig, in collaboration with the Honda HRC team, has transferred this technology from the racing world to road motorcycles.

Brakes are a key element for motorcycle safety and control, as well as for ensuring proper braking feel during riding. In many cases, especially under demanding riding conditions —such as repeated hard braking or high ambient temperatures— the braking system operates above its ideal working range, which can lead to reduced performance and braking feel.

Thanks to the Air Duct system, brake operating temperature can be reduced by an average of 10 °C, improving braking performance, efficiency and feel.

The kit consists of two cooling ducts specifically designed to direct airflow toward the brake calipers.

They are designed and manufactured at Puig facilities in Barcelona using the most advanced plastic molding technologies, ensuring a lightweight and durable component.

The brackets are made of steel to guarantee structural resistance and feature a textured black finish with a prior cataphoresis treatment that protects the material against corrosion and ensures long-term durability.

Installation is simple and can be completed in just a few minutes by following the step-by-step instructions included in paper format or available online.

During installation it is important to apply the specified tightening torque to the bolts to ensure proper fastening, as this is a sensitive area of the motorcycle.

Please review the recommendations and warnings included in the mounting instructions.

The brake cooling system works as an aerodynamic duct that captures frontal airflow, compresses and accelerates it to direct it straight toward the brake calipers.

This prevents overheating of the braking system and allows the calipers to operate within their optimal temperature range.

Track tests have shown an average temperature reduction of approximately 10 °C.

The Puig Air Duct for Ducati Panigale V2 / V4 / V4S 20’-24 is a product developed from MotoGP racing experience. Puig, in collaboration with the Honda HRC team, has transferred this technology from the racing world to road motorcycles.

Brakes are a key element for motorcycle safety and control, as well as for ensuring proper braking feel during riding. In many cases, especially under demanding riding conditions —such as repeated hard braking or high ambient temperatures— the braking system operates above its ideal working range, which can lead to reduced performance and braking feel.

Thanks to the Air Duct system, brake operating temperature can be reduced by an average of 10 °C, improving braking performance, efficiency and feel.

The kit consists of two cooling ducts specifically designed to direct airflow toward the brake calipers.

They are designed and manufactured at Puig facilities in Barcelona using the most advanced plastic molding technologies, ensuring a lightweight and durable component.

The brackets are made of steel to guarantee structural resistance and feature a textured black finish with a prior cataphoresis treatment that protects the material against corrosion and ensures long-term durability.

Installation is simple and can be completed in just a few minutes by following the step-by-step instructions included in paper format or available online.

During installation it is important to apply the specified tightening torque to the bolts to ensure proper fastening, as this is a sensitive area of the motorcycle.

Please review the recommendations and warnings included in the mounting instructions.

The brake cooling system works as an aerodynamic duct that captures frontal airflow, compresses and accelerates it to direct it straight toward the brake calipers.

This prevents overheating of the braking system and allows the calipers to operate within their optimal temperature range.

Track tests have shown an average temperature reduction of approximately 10 °C.